Home > Self Clinching > Clinch Nuts
Clinch Nuts Supplier distributor
santa ana orange county los angeles southern california

ACN Series High Strength Clinch Nut by Sherex

The ACN clinch nut is designed to be installed into pre-pierced holes. Displacement lobes on the bottom of the nut force the sheet to flow into the locking groves. As a result the nut has high push out and torque values. The ACN clinch nut is designed for thicker sheet metal applications (above 2mm). A special design of the nut can be used in thinner sheet metal applications. The unique feature of this nut is that the underside of the sheet metal stays flat with no indents.

more info
ARN Series Universal Clinch Nut by Sherex

The ARN riveting nut is designed to be installed into pre-pierced flat holes. The riveting section of the nut is folded over the sheet metal using a special die button. The riveting action forms the sheet metal into a locking grove of the nut. By trapping the sheet metal into the locking grove, high push out, pull through and torque values are achieved, even in very thin sheets.  The nut can be installed with four installation methods. The methods depend on the sheet metal thickness, hardness and the installation space.

more info
ASN Clinch Nuts by Sherex

The ASN clinch nut is designed to be installed into pre-pierced holes. The sheet metal is formed into an undercut section on the nut collar by the die button and the knurled ring. As a result the nut has high push out and torque values. The ASN nut is designed for thicker sheet metal applications (above 1.5mm).

more info