Single Wire Clamps
Note: All Dimensions are in Inches. Conforms to SAE spec. J1508.
| ROTOR CLAMP HC NO. | Case Quantity Min. 1 case | Approx Case Weight (lbs.) | EFFECTIVE CLAMPING RANGE | Nom Wire Dia. | F Length of Tangs | G Clearance at overlap Max. | W Width over Tangs Max. | X Gaging Wire Max. | Y Overall Height (Ref. Only) | Color Code * | Pneumatic Installation Tool | |||||
| A Max. Dia. | B Nom. Dia. | C Min. Dia. | D No-Go Gage Dia. | |||||||||||||
| 19N | HC-4 | 15000 | 25.7 | .253 | .250 | .247 | .233 | .062 | 3/8 | +.000 -1/32 |
.010 | .75 | .003 | .88 | G | PWS-4 |
| HC-5 | 10000 | 18.6 | .315 | .312 | .309 | .286 | .062 | 3/8 | .010 | .75 | .003 | 1.00 | R | PWS-5 | ||
| HC-5.5 | 10000 | 19.8 | .345 | .342 | .339 | .320 | .062 | 3/8 | .010 | .75 | .003 | 1.00 | G | PWS-5.5 | ||
| 35N | HC-6 | 10000 | 37.9 | .380 | .375 | .370 | .350 | .082 | 3/8 | .015 | .88 | .004 | 1.06 | D | PWS-6 | |
| HC-7 | 8000 | 38.9 | .442 | .437 | .432 | .405 | .087 | 3/8 | .015 | .94 | .004 | 1.12 | G | PWS-7 | ||
| HC-7.5 | 7500 | 37.5 | .473 | .468 | .463 | .430 | .087 | 3/8 | .015 | 1.00 | .005 | 1.12 | D | PWS-7.5 | ||
| HC-8 | 6000 | 33.7 | .510 | .500 | .490 | .462 | .092 | 3/8 | .025 | 1.00 | .005 | 1.19 | R | PWS-8 | ||
| HC-8.5 | 6000 | 34.8 | .541 | .531 | .521 | .492 | .092 | 3/8 | .025 | 1.00 | .005 | 1.38 | G | PWS-8.5 | ||
| HC-9 | 4500 | 38.0 | .573 | .562 | .551 | .520 | .107 | 3/8 | .025 | 1.06 | .006 | 1.38 | D | PWS-9 | ||
| HC-9.5 | 4500 | 39.0 | .604 | .593 | .582 | .550 | .107 | 3/8 | .025 | 1.06 | .006 | 1.38 | R | PWS-9.5 | ||
| HC-10 | 4000 | 34.8 | .640 | .625 | .610 | .580 | .107 | 3/8 | .025 | 1.06 | .006 | 1.38 | G | PWS-10 | ||
| HC-10.5 | 4000 | 37.6 | .671 | .656 | .641 | .611 | .107 | 3/8 | .025 | 1.06 | .006 | 1.38 | D | PWS-10.5 | ||
| HC-11 | 3500 | 37.0 | .703 | .687 | .671 | .635 | .112 | 3/8 | .025 | 1.12 | .006 | 1.50 | R | PWS-11 | ||
| HC-12 | 3000 | 33.0 | .770 | .750 | .730 | .690 | .112 | 3/8 | .031 | 1.19 | .008 | 1.50 | D | PWS-12 | ||
| HC-13 | 2500 | 30.7 | .832 | .812 | .792 | .740 | .117 | 3/8 | .031 | 1.25 | .008 | 1.50 | G | PWS-13 | ||
| HC-14 | 2000 | 28.2 | .900 | .875 | .850 | .800 | .122 | 3/8 | .031 | 1.25 | .008 | 1.62 | R | PWS-14 | ||
| HC-15 | 2000 | 31.0 | .968 | .937 | .906 | .855 | .122 | 3/8 | .062 | 1.25 | .008 | 1.69 | D | PWS-15 | ||
| HC-16 | 1750 | 32.9 | 1.031 | 1.000 | .969 | .915 | .132 | 3/8 | .062 | 1.31 | .008 | 1.75 | G | PWS-16 | ||
| HC-17 | 1400 | 32.6 | 1.090 | 1.062 | 1.034 | .960 | .142 | 3/8 | .062 | 1.50 | .010 | 1.88 | R | PWS-17 | ||
| HC-17.5 | 1250 | 32.5 | 1.124 | 1.093 | 1.065 | .991 | .152 | 3/8 | .062 | 1.50 | .010 | 1.90 | R | PWS-17.5 | ||
| 1/2 Keg |
HC-18 | 1000 | 28.0 | 1.150 | 1.125 | 1.100 | 1.030 | .152 | 3/8 | ±1/32 | .062 | 1.62 | .010 | 2.00 | D | PWS-18 |
| HC-188 | 1500 | 26.4 | 1.150 | 1.125 | 1.100 | 1.030 | .122 | 3/8 | .062 | 1.62 | .010 | 2.00 | D | PWS-188 | ||
| HC-19 | 1000 | 28.3 | 1.218 | 1.187 | 1.156 | 1.095 | .152 | 3/8 | .062 | 1.62 | .010 | 2.00 | G | PWS-19 | ||
| HC-19.5 | 1000 | 29.3 | 1.250 | 1.218 | 1.187 | 1.126 | .152 | 3/8 | .062 | 1.63 | .010 | 2.00 | R | PWS-19.5 | ||
| HC-20 | 1000 | 30.0 | 1.280 | 1.250 | 1.219 | 1.145 | .152 | 3/8 | .062 | 1.75 | .010 | 2.00 | R | PWS-20 | ||
| HC-21 | 800 | 28.8 | 1.344 | 1.312 | 1.281 | 1.210 | .162 | 3/8 | .062 | 1.75 | .010 | 2.31 | D | PWS-21 | ||
| HC-22 | 800 | 29.6 | 1.406 | 1.375 | 1.344 | 1.250 | .162 | 3/8 | .062 | 1.88 | .010 | 2.31 | G | PWS-22 | ||
| HC-23 | 750 | 25.5 | 1.468 | 1.437 | 1.406 | 1.300 | .162 | 3/8 | .062 | 1.88 | .010 | 2.31 | R | PWS-23 | ||
| HC-24 | 600 | 23.4 | 1.531 | 1.500 | 1.469 | 1.350 | .162 | 3/8 | .062 | 1.88 | .010 | 2.38 | D | PWS-24 | ||
| HC-25 | 600 | 23.6 | 1.592 | 1.561 | 1.530 | 1.411 | .162 | 3/8 | +1/16 -.000 |
.062 | 1.88 | .010 | 2.53 | D | PWS-25 | |
| HC-26 | 600 | 28.8 | 1.672 | 1.625 | 1.578 | 1.455 | .172 | 3/8 | .062 | 2.00 | .010 | 2.69 | D | PWS-26 | ||
| HC-28 | 500 | 25.0 | 1.797 | 1.750 | 1.703 | 1.550 | .172 | 3/8 | .062 | 2.12 | .010 | 2.75 | D | PWS-28 | ||
| HC-30 | 500 | 29.0 | 1.937 | 1.875 | 1.812 | 1.675 | .177 | 3/8 | .093 | 2.25 | .010 | 2.88 | D | PWS-30 | ||
| HC-31 | 500 | 29.5 | 2.000 | 1.937 | 1.875 | 1.720 | .177 | 3/8 | .093 | 2.25 | .010 | 3.00 | D | PWS-31 | ||
| HC-32 | 500 | 30.0 | 2.061 | 2.000 | 1.939 | 1.750 | .177 | 3/8 | .093 | 2.31 | .010 | 3.00 | D | PWS-32 | ||
| HC-34 | 500 | 31.9 | 2.187 | 2.125 | 2.062 | 1.860 | .182 | 3/8 | .093 | 2.31 | .010 | 3.19 | D | PWS-34 | ||
| HC-35 | 500 | 34.2 | 2.250 | 2.187 | 2.125 | 1.925 | .182 | 3/8 | .093 | 2.31 | .010 | 3.25 | D | PWS-35 | ||
| HC-36 | 500 | 34.5 | 2.312 | 2.250 | 2.187 | 2.000 | .182 | 3/8 | .093 | 2.38 | .010 | 3.25 | D | PWS-36 | ||
| HC-38 | 500 | 39.5 | 2.437 | 2.375 | 2.312 | 2.100 | .192 | 3/8 | .093 | 2.38 | .010 | 3.44 | D | PWS-38 | ||
| HC-40 | 500 | 41.5 | 2.561 | 2.500 | 2.439 | 2.187 | .192 | 3/8 | .093 | 2.38 | .010 | 3.62 | D | PWS-40 | ||
| HC-42 | 400 | 39.2 | 2.688 | 2.625 | 2.562 | 2.320 | .202 | 3/8 | .093 | 2.38 | .010 | 3.75 | D | PWS-42 | ||
| HC-46 | 400 | 41.9 | 2.938 | 2.875 | 2.812 | 2.625 | .220 | 3/8 | .093 | 2.63 | .012 | 3.88 | D | PWS-46 | ||
| HC-50 | 400 | 53.8 | 3.218 | 3.125 | 3.032 | 2.844 | .220 | 3/8 | .125 | 3.12 | .013 | 4.00 | D | PWS-50 | ||
* GREEN, R-RED, D-DICHROMATE(YELLOW), NOTE: SELECTED SIZES AVAILABLE IN STAINLESS STEEL. INQUIRE FOR AVAILABILITY.
Note: All Dimensions are in inches.
| ROTOR CLAMP HW NO. | Case Quantity Min. 1 case | .Approx Case Weight (lbs.) | E Nom. Wire Dia. | EFFECTIVE CLAMPING RANGE | X Dia. Gaging Wire | G Clearance at overlap Max. | F Length of Tangs | W Width over Tangs Max. | Z Width over Tangs when on a Dia. | Y Overall Height (Ref. Only) | Color Code * | Pneumatic installation Tool | |||||
| A Max. Dia. | B Nom. Dia. | C Min. Dia. | D No-Go Gage Dia. | ||||||||||||||
| HW-9 | 8000 | 39 | .082 | .573 | .562 | .551 | .520 | .006 | .025 | 1/4 | +.000-1/32 | 1-1/16 | .415 | +.020-.000 | 1.25 | ZD | PWS-9 |
| HW-11 | 6000 | 33 | .087 | .703 | .688 | .671 | .635 | .006 | .025 | 1/4 | +.000-1/32 | 1-1/8 | .425 | +.020-.000 | 1.38 | R | PWS-11 |
| HW-12 | 5000 | 30 | .087 | .770 | .750 | .730 | .690 | .008 | .031 | 1/4 | +.000-1/32 | 1-3/16 | .425 | +.020-.000 | 1.38 | ZD | PWS-12 |
| HW-13 | 4000 | 28 | .092 | .832 | .812 | .792 | .740 | .008 | .031 | 1/4 | +.000-1/32 | 1-1/4 | .410 | +.020-.000 | 1.38 | G | PWS-13 |
| HW-14 | 3000 | 26 | .092 | .900 | .875 | .850 | .800 | .008 | .031 | 1/4 | +.000-1/32 | 1-1/4 | .410 | +.020-.000 | 1.49 | R | PWS-14 |
| HW-16 | 2500 | 29 | .107 | 1.031 | 1.000 | .969 | .915 | .008 | .062 | 1/4 | ±1/32 | 1-1/2 | .510 | +.020-.000 | 1.75 | G | PWS-16 |
| HW-18 | 1700 | 28 | .122 | 1.150 | 1.125 | 1.100 | 1.030 | .010 | .062 | 1/4 | ±1/32 | 1-5/8 | .525 | +.020-.000 | 1.88 | ZD | PWS-18 |
| HW-19 | 1400 | 24 | .122 | 1.218 | 1.187 | 1.152 | 1.095 | .010 | .062 | 1/4 | ±1/32 | 1-5/8 | .510 | +.020-.000 | 1.88 | G | PWS-19 |
| HW-20 | 1400 | 23 | .122 | 1.280 | 1.250 | 1.219 | 1.145 | .010 | .062 | 1/4 | ±1/32 | 1-3/4 | .525 | +.030-.000 | 1.88 | R | PWS-20 |
| HW-21 | 1300 | 28 | .132 | 1.344 | 1.312 | 1.281 | 1.210 | .010 | .062 | 1/4 | ±1/32 | 1-3/4 | .540 | +.030-.000 | 2.19 | ZD | PWS-21 |
| HW-22 | 1000 | 22 | .132 | 1.406 | 1.375 | 1.344 | 1.250 | .010 | .062 | 1/4 | ±1/32 | 1-7/8 | .540 | +.030-.000 | 2.19 | G | PWS-22 |
| HW-23 | 1000 | 23 | .132 | 1.468 | 1.437 | 1.406 | 1.300 | .010 | .062 | 1/4 | ±1/32 | 1-7/8 | .525 | +.030-.000 | 2.19 | R | PWS-23 |
| HW-24 | 1000 | 24 | .132 | 1.531 | 1.500 | 1.469 | 1.350 | .010 | .062 | 1/4 | +1/16-.000 | 1-7/8 | .540 | +.030-.000 | 2.25 | ZD | PWS-24 |
| HW-26 | 900 | 27 | .142 | 1.672 | 1.625 | 1.578 | 1.455 | .010 | .062 | 1/4 | ±1/16 | 2 | .580 | +.030-.000 | 2.56 | ZD | PWS-26 |
* GREEN, R-RED, ZD-DICHROMATE (YELLOW)
Find out more by clicking on Constant Tension Band Clamps, Double Wire Clamps or The Rotor Clamp Difference. Contact an Engineered Source salesperson today for a quote on constant single wire clamps.