Home > Wall Anchors > Miscellaneous Anchor Fasteners
Bantam Plug Powers Wall Anchor

The Bantam Plug ™anchor is a plastic anchor designed for use with lightweight fixtures with a sheet metal or wood screw. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.


Fluted Plastic Powers Wall Anchor

The Fluted Plastic Anchor is designed for light duty fastening applications with sheet metal or wood screws. Longitudinal ribs on the anchor body prevent it from turning during tightening of the screw. This inexpensive plastic screw anchor comes color-coded by diameter for easy application. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.


Polly Powers Sleeve Type Wall Anchor

The Polly™ is a sleeve type hollow wall anchor designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood.

Scru Lead Powers Lead Alloy Wall Anchor

The Scru-Lead™ anchor is designed for use with sheet metal or wood screws in concrete, block or brick. The anchor is made entirely of lead alloy which is soft enough for easy installation, yet hard enough to give sure, secure holding power. The performance of this product depends on the integrity of the base material. The anchor is recommended for light duty applications where holding power is not a critical factor. It should not be used overhead.


Zip-It Powers Self Drilling Wall Anchor

The Zip-It® anchor is a one piece self drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a No. 6 or No. 8 screws in 3/8" to 1" wallboard. The Zip-It® Jr. is formed from engineered nylon for use with No. 6 screws in 3/8" to 5/8" wallboard.